package sniper import ( "time" "huya-go/internal/huya" ) // MinTriggerAdvance 是触发提前量的下限。 // // 动态提前量只补偿「请求在途时间 + 时钟误差」,正常情况下就是几十毫秒; // 下限 50ms 是为了在时钟校准异常(误差边界为 0)时仍然留一点余量。 const MinTriggerAdvance = 50 * time.Millisecond const ( // WarmupLead 是预热连接相对开抢时刻的提前量。 // // 2 秒足够建连 + 握手(实测单账号建连约 300ms),又不会让连接闲置太久: // 旧实现一启动就预热、然后干等几十分钟,连接是否还活着只能靠运气。 WarmupLead = 2 * time.Second // ResyncLead 是「临近复校」相对开抢时刻的提前量。 // // 只做一次校准是不够的:pc-1/pc-2/pc-3 三台机器的本机偏移分别是 ≈0 / -370ms / +900ms, // 而且本机时钟在等待期间还会漂移。触发前 3 秒再校准一次,能把这部分误差压掉。 ResyncLead = 3 * time.Second ) // TriggerPlan 描述一次定时抢购的关键时刻(全部是「本机时钟」下的时刻)。 type TriggerPlan struct { // Advance 是相对开抢时刻的提前量(含 RTT/2 与时钟误差补偿)。 Advance time.Duration // OpenAt 是开抢时刻换算到本机时钟后的时刻。 OpenAt time.Time // WarmupAt 是应当开始预热连接的时刻。 WarmupAt time.Time // ResyncAt 是应当复校服务端时钟的时刻。 ResyncAt time.Time // TriggerAt 是应当开始发请求的时刻。 TriggerAt time.Time // WindowEnd 是抢购窗口结束时刻。 WindowEnd time.Time } // PlanTrigger 计算定时抢购的预热 / 复校 / 触发 / 窗口结束时刻。 // // target 是界面上填写的时间,按「服务端时间」理解;offset 是「服务端 - 本机」的偏差。 // advance 默认取 calibration.ErrorBound + calibration.RTT/2(参考 dygou_go 的 // dynamicAdvance):固定 2500ms 的提前量既浪费又伤身——2026-10-16 实测,开抢前那 2.5 秒 // 打出去的请求全部被「活动太火爆」挡回,等于先把账号的令牌桶烧掉。 // overrideLead > 0 时沿用旧行为(兼容界面里显式填写的提前量)。 func PlanTrigger(target time.Time, calibration huya.TimeCalibration, overrideLead time.Duration, window time.Duration) TriggerPlan { advance := overrideLead if advance <= 0 { advance = calibration.ErrorBound + calibration.RTT/2 if advance < MinTriggerAdvance { advance = MinTriggerAdvance } } if window <= 0 { window = DefaultWindowSeconds * time.Second } openAt := target.Add(-calibration.Offset) return TriggerPlan{ Advance: advance, OpenAt: openAt, WarmupAt: openAt.Add(-WarmupLead), ResyncAt: openAt.Add(-ResyncLead), TriggerAt: openAt.Add(-advance), WindowEnd: openAt.Add(window), } } // WindowDuration 把「窗口秒数」配置换算成时长;<=0 时取默认值。 func WindowDuration(seconds int) time.Duration { if seconds <= 0 { return DefaultWindowSeconds * time.Second } return time.Duration(seconds) * time.Second }